Porting NETMF 4.4 to an STM32F4

[hwalker_MIWV]

Here is a post where someone was confused about the same concept:

G80 Dev Board Physical PIN to GHI.Pins.G80.Gpio Mapping?

Im confused about CPU.PIN #'s in GHI.PIN’s and how they relate to the physical CPU pin #'s, For example, I have a button wired up on GHI.Pins.G80.Gpio.PE0 that is working correctly on the dev board and when pushed is being read correctly. Its connected to PE0 which is physically pin 97 on the G80 SOC [url]http://www.ghielectronics.com/downloads/schematic/G80_Dev_Board_SCH.pdf[/url] But looking at the definition for ```cs]public const Cpu.Pin PE0 = (Cpu.Pin)64;[/code it is equal to 64…

I still don’t understand