hi
i am trying to update my g80th module to tinyclros. i have put the module into bootloader mode and i have uploaded the 0.7.0 firmware. when i click the run button in the fez config the firmware start but windows 7 do not recognize the module. where are the driver for the module? i have download the usb driver for windows 7 but after installation do not have any change
when i click to run in loader tab (fez config) the g80 module is reset. if i check in windows 7 menaged device tools the g80 module don’t have a com port becouse windows don’t install the driver.
in the fez config debug tab the module dont’t recognized. in the connection section i read no device.
the com port is recognized only in bootloader mode.
i see the g80 icon with an exclamation point. i click this icon and next update driver, but windows seven doesn’t find any driver (online search and local)
with my win10 pc the g80 is recognized and this work fine. i also check g30th and i don’t have any problem. i deduct that my g80 don’t have firmware problem. i do not know becouse with the same module i have problems on Windows 7! i should install other software package ?
If the same G80TH works on Windows 10, but not Windows 7, something is likely wrong with your Windows 7 machine. Try different USB ports, make sure it has an internet connection and can download drivers from Windows Update, see if other devices work on it.