Just got Cerberus Attached Led7C and get error

Archive
1

Here the error

Found debugger!

Create TS.

Loading start at 805b980, end 808459c

Assembly: mscorlib (4.2.0.0) Assembly: Microsoft.SPOT.Native (4.2.0.0) Assembly: Microsoft.SPOT.Hardware (4.2.0.0)
Assembly: Microsoft.SPOT.Graphics (4.2.0.0) Assembly: Microsoft.SPOT.TinyCore (4.2.0.0)
Assembly: Microsoft.SPOT.Hardware.SerialPort (4.2.0.0) Assembly: Microsoft.SPOT.IO (4.2.0.0)
Assembly: System.IO (4.2.0.0) Assembly: Microsoft.SPOT.Hardware.OneWire (4.2.0.0)
Assembly: Microsoft.SPOT.Hardware.Usb (4.2.0.0) Assembly: Microsoft.SPOT.Hardware.PWM (4.2.0.1)
Assembly: Microsoft.SPOT.Net (4.2.0.0) Assembly: System (4.2.0.0) Loading Deployment Assemblies.

Attaching deployed file.

Assembly: GTM.GHIElectronics.LED7C (4.2.100.0) Attaching deployed file.

Assembly: Gadgeteer (2.42.0.0) Attaching deployed file.

Assembly: tesdt (1.0.0.0) Attaching deployed file.

Assembly: GHIElectronics.Gadgeteer.FEZCerberus (4.2.100.0) Attaching deployed file.

Assembly: GHI.OSHW.Hardware (4.2.6.0) ***********************************************************************

  •                                                                 *

  • ERROR!!! Firmware version does not match managed code version!!! *

  •                                                                 *

  •                                                                 *

  • Invalid native checksum: GHI.OSHW.Hardware 0x09E0F047!=0xF0D4135D *

  •                                                                 *

Resolving.

Link failure: some assembly references cannot be resolved!!

Assembly: tesdt (1.0.0.0) needs assembly ‘GTM.GHIElectronics.Distance_US3’ (4.2.100.0)

Assembly: tesdt (1.0.0.0) needs assembly ‘GTM.GHIElectronics.UsbClientSP’ (4.2.100.0)

Assembly: tesdt (1.0.0.0) needs assembly ‘GHIElectronics.Gadgeteer.FEZCerberus’ (4.2.100.0)

Assembly: GHIElectronics.Gadgeteer.FEZCerberus (4.2.100.0) needs assembly ‘GHI.OSHW.Hardware’ (4.2.6.0)

Error: a3000000

Waiting for debug commands…

The program ‘[1] Micro Framework application: Managed’ has exited with code 0 (0x0).

2

You need to load latest firmware to the board.

3

Yes, thanks, I figured out this yesterday almost immediately after my post, a little bit confusing forum search too much information you guys have in your forum :smiley: