While doing some testing for @ sheila.dada in https://www.ghielectronics.com/community/forum/topic?id=10663 I discovered that Glide/Touch Screen and the pulse module don’t play nicely together and the pulse module will pickup an unknown signal and report it as a pulse (ie ITS ALIVE!!! meaning no finger in the sensor but it still gets a pulse etc anyways and based on the O2 saturation, I’m think ghost zombie). I tried this with a Spider/Hydra and a T35/TE35 and all combinations behaved incorrectly, even with trying different sockets for the pulse module. So heads up out there if your planning on doing some pulse/touch stuff. Replace the touch screen with an OLED and it works as expected.
Will test it out