[title]Gadgeteer OLED(SSD1306) Display Module[/title]
http://code.tinyclr.com/project/439/gadgeteer-oledssd1306-display-module/
[line]
I needed a display for a project I am working on. I can’t use T35 module and I don’t have Seeed’s OLED module, so I have made my own using Adafruit’s Monochrome 128x64 OLED graphic display and Gadgeteer Extender module. This driver is a fully functional driver similar to the one that is made by Seeed. It uses S (SPI) socket on the Gadgeteer. To make it work you need to make following connections:
(SSD1306 ---- Extender module)
GND - GND
VDD,VBAT - 3V3
CS - P6
RESET - P4
D/C - P5
Clk - P9
Dat - P7
Attached zip files includes installer for the module, so you can use it right away.