Main Site Documentation

COM1 Debugging


#1

I get the following error from MFDeploy :

Pinging… Error: No response from device

I have put a jumber over the mode pins on the Domino, so they are connected.

I have connected to COM1 using a FDTI cable, TX > RX and RX > TX.

My virtual com port is COM3 on PC and is set to 9600.

I dont think I’ve missed any steps and the c# app does do attempt to use COM1.

Please help.


#2

Fixed it!

You have to connect the FDTI GND to GND on board!!