Can not deploy program on Fez Cobra II Wifi

Hi!
I can not deploy program on Fez Cobra II, get error

Error 3 Device not found or cannot be opened - USB:Gadgeteer

And I see device found in VS and here what I see with device info via .NETMF Deployment tool

DeviceInfo:
HAL build info: 4.2.0.0, Microsoft Copyright © Microsoft Corporation. All rig
OEM Product codes (vendor, model, SKU): 255, 0, 65535
Serial Numbers (module, system):
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Solution Build Info: 4.2.10.1, Copyright © GHI Electronics, LLC
AppDomains:
default, id=1
Assemblies:
mscorlib,4.2.0.0
Microsoft.SPOT.Native,4.2.0.0
Microsoft.SPOT.Hardware,4.2.0.0
Microsoft.SPOT.Hardware.PWM,4.2.0.1
Microsoft.SPOT.Security.PKCS11,4.2.0.0
System.Security,4.2.0.0
Microsoft.SPOT.IO,4.2.0.0
GHI.Premium.IO,4.2.10.0
Microsoft.SPOT.Graphics,4.2.0.0
System.Http,4.2.0.0
GHI.Premium.USBHost,4.2.10.0
System,4.2.0.0
Microsoft.SPOT.Net.Security,4.2.0.0
GHI.Premium.System,4.2.10.0
GTM.GHIElectronics.Display_T35,1.1.3.0
Microsoft.SPOT.Touch,4.2.0.0
Microsoft.SPOT.TinyCore,4.2.0.0
System.Net.Security,4.2.0.0
GHI.Premium.Net,4.2.10.0
Microsoft.SPOT.Net,4.2.0.0
System.IO,4.2.0.0
GHI.Hardware.G120,4.2.10.0
Gadgeteer,2.42.0.0
GHI.Premium.Hardware,4.2.10.0
GHIElectronics.Gadgeteer.FEZCobra_II,1.1.4.0
Microsoft.SPOT.Hardware.SerialPort,4.2.0.0
Cobra 2 WiFi Tester,1.0.0.0

And I see it in device manager as G120,

Any ideas why?

Thanks

The Blue circuit on your cobra is G120 so what you see is normal. Maybe try the troubleshooting guide?

Troubleshooting offers to update firmware, and 1st of all question then were to download Fez Config, this is 1st confusing part

Good question. The docs were updated before the sdk is released. You can use legacy loaders found on the support page or someone from the team will help tomorrow.

Do you mean STDFU Tester? If yes it doesn’t see it :frowning:

This for now https://www.ghielectronics.com/downloads/NETMF/GHI%20NETMF%20Firmware%20Updaters.zip but you should use fezconfig in the future.

Thanks Gus, I found Tera Term and then uploading right now via NETMF Deployment tool

Yes it worked, I just connected to my home wifi!!!

2 Likes